Heavy Type Welded Bar Grate
Heavy-Duty Steel Gratings
uses thicker (1/4", 5/16", 3/8") and deeper bearing bars. Heavy-Duty Welded Grating has the strength for heavy-duty load areas such as airfields, highways, industrial plants, truck and bus terminals, parking lots and railroad yards. Common uses are flooring, driveways, subway and tunnel ventilation grilles, curb inlet grates, ramps, docks, etc.
Welded Heavy Duty Gratings are designed to service applications subject to heavy rolling and static loads such as highways, plant floors, loading docks, inlet covers and airports. Since these conditions can range from light-duty forklifts to heavy-duty truck or aircraft traffic, heavy duty gratings are manufactured in a wide range of bar sizes and spacings.
It is a sturdy grating to carry loads and maintain the same level over many years of use. Whenever rolling wheel loads are to be used over the grating, we recommend that the grating be load banded to add lateral strength. Serrations are available on bars up to 3/8" thick to provide additional traction for rolling loads.
Standard heavy-duty bar grating is resistance-welded for durability, strength and safety using an automated electric/hydraulic welding process. High temperatures, combined with high pressure, fuse the bearing bars and cross bars together to form a permanent joint.
Also, EON-HESLY is one of the few manufacturers that has the capability of providing you with those "really big" grates. If your application is not adequately addressed by these load conditions, please contact our engineering department and we will gladly assist in the selection of a heavy duty grating to satisfy your specific needs.
Steel grating standards:
|Grating Standard||Material Standard||HDG standard|
China: YB/T 4001.1-2007
UK: BS 4592-1987
Australia: AS 1657-1985
China: GB 700-88
UK: BS 4360:1990
USA: ASTM A36/A36M-96
AUSTRALIA: AS 3679
USA: ASTM A123/A123M-97a
AUSTRALIA: AS 1650
Materials & Finishes
Heavy duty gratings are manufactured in carbon steel and 300 series stainless steels. Carbon steel products are available bare (no finish), painted with manufacturers standard paint, or hot dip galvanized. Stainless steel products are available mill finish, commercially cleaned or electro-polished.
How to Install steel grating ?
1.Welding & using saddle clips are two ways for installation of grating. The welding is suitable for those places where there is no need to move or dismental,for instance,the flooring around the machines. However,using saddle clips are featuring in easy installation & saving zinc layer.
2.Regarding welding installation, angle wolding would used at the first bearing bar of every corner,which the welding length is no less than 20mm,&the height is no less than 3mm.
3.Saddle clip composed of a top plate,a hold down & a M8 bolt, is suitable for all kinds of steel gratings installation.
4.Regarding saddle clip installation, at laest four sets of saddle clips would be used in one pc grating.It would be better using more in the staddle for those gratings with a bigger span.
|This is our project of steel grating ,it can be used to many aspects just like:|
|platform||trestle||trend||fence||equipment walk way|
|pavement||channel over||manhole cover||trash rack||mentance platform|
|foot bridge||scaffold||ladder||storage shelf||marine platform|
Packing & Delivery
How to order
1.Bearing Bars center to center and cross bars
center to center
2.Depth & thickness of bearing bars
3.Surface:serrated or smooth
4.Dimensions of area
5.Span(direction of bearing bars)
6.Finish: mill,hot dip galvanized
7.banding or no banding
|Contact HESLY for more details or FREE quote... ...|
Tel: +86-318-7963989 Mob: +86 188 3181 6606
A branch of HESLY METAL MESH GROUP LIMITED
Group Web: www.heslymetalmesh.com
Gratings Web: www.eon-steel-grating.com